APAM for Efficient Flocculation in the Paper Industry

Polyacrylamide is widely used in the paper industry as a retention aid, a filter aid, a homogenizer to improve the quality of paper, slurry dehydration, the retention rate of fine fibers and fillers, reduce the consumption of raw materials and environmental pollution, as a dispersant, can improve the uniformity of paper.Polyacrylamide is mainly used in the paper industry in two aspects: one is to improve the retention rate of fillers, pigments, etc. to reduce the loss of raw materials and environmental pollution;The second is to improve the strength of the paper.Adding polyacrylamide to the paper can increase the retention rate of fine fibers and packing particles in the net and accelerate the dehydration of the paper.The mechanism of action of polyacrylamide is that the particles in the slurry are electrically neutralized or bridged to retain flocculation on the press cloth.The formation of flocs can also make the water in the slurry easier to filter out, reduce the loss of fiber in white water, reduce environmental pollution, and improve the efficiency of filtration and precipitation equipment.

1. Efficient flocculation

2. Low dose requirements

3. High stability

4. Reduce water turbidity

5. Improve water quality

1. The APAM solid is packed in polypropylene woven bags, lined with plastic bags, each bag is 25kg; The colloidal body shall be packed in plastic drums, lined with plastic bags, each of which is 50kg or 200kg.

2. This product is hygroscopic and should be stored in a cool and dry place with a temperature lower than 35 ° C.

3. The APAM solid shall not be scattered on the ground to prevent the ground from becoming slippery after moisture absorption.

4. The storage period of our products is one year.