|
Product Details:
|
| CAS: | 9000-11-7 | Color: | White |
|---|---|---|---|
| Package: | 25kg/bag | Model: | HV Or LV |
| Function: | Oil Drilling | Port: | Shanghai，Ningbo，Qingdao |
| Highlight: | LV Powder Polyanionic Cellulose PAC,Polyanionic Cellulose PAC Powder,Oilfield Drilling Fluids Additives |
||
Application in engineering fields such as oil and gas drilling and well digging
Drilling fluid and completion fluid technology are important components of petroleum drilling engineering, playing a critical role in ensuring safe, high-quality, and rapid drilling. As a type of treatment agent used to adjust the performance of drilling and completion fluids, the main function of cellulose derivatives is to reduce filtration and increase viscosity.
It is generally believed that the mechanism of reducing filtration loss by polyanionic cellulose is mainly to improve the coalescence stability of the system by forming an adsorption solvation layer on the surface of drilling fluid clay particles; By providing protection to clay fine particles, it hinders the bonding and enlargement of clay fine particles; Reduce the permeability of the mud cake by increasing the viscosity of the filtrate and blocking the pores.
Polyanionic cellulose is easily dispersed in all water-based drilling fluids, suitable for drilling fluids from freshwater to saturated saltwater. In low solid and solid free drilling fluids, it can significantly reduce filtration loss and thin mud cake thickness, and has a strong inhibitory effect on shale hydration.
Compared with CMC produced by conventional processes, PAC has the following characteristics:
a. High degree of substitution, uniform substitution, high transparency, controllable viscosity and reduced water loss;
b. Any water-based mud suitable for freshwater, seawater, or saturated saltwater;
c. The mud formulated with this product has good characteristics of reducing water loss, workability, and high temperature resistance;
d. The mud prepared with this product has rheological properties,
e. Can suppress the dispersion and expansion of clay and shale in high salt media, thereby controlling wellbore pollution;
f. Stabilize soft soil structures to prevent wellbore collapse caused by rising water levels;
g. When drilling through the rock surface, slow down the accumulation of drilling solids in the mud;
h. Suppress turbulence in the drill pipe to minimize pressure loss in the reflux system;
i. Enable mud to increase slurry production and reduce filtration loss;
p. It can stabilize mud foam.
So, PAC is ideal as an inhibitor and fluid loss agent. The mud fluid prepared by PAC inhibits the dispersion and expansion of clay and shale in high salt media (monovalent salt), and controls wellbore pollution. In addition, the use of PAC to prepare mud repair fluid is low solid phase, which does not hinder the permeability of the production layer due to solids, that is, does not damage the production layer; And the amount of filtered water is small, which means the ability to resist water loss is strong, and the amount of water entering the production layer is small, which can avoid the formation of water stagnation caused by emulsion blockage. It can avoid permanent damage to the production layer and has the ability to clean the wellbore.
Lanyao was established since 1990,in the start-up stage, as a watertreatment chemicals distributor, we provided product sales and technical supports for various regional sewage plants in East China.
Since Eastern China has always been a concentrated area for the development of light and heavy industries in the early 20th century, the water qualities of sewage plants in various regions are relatively different and complicated so that the treatment is relatively difficult. Therefore, we usually send technicians to the site and conduct micro-experiments based on detection report on COD,BOD,SS,ammonia nitrogen,total phosphorus,heavy metal and other impurities.As that we can match the appropriate type of chemicals to obtain the best treatment effect.
Until 2006, according to nearly ten years of technology accumulation and research on various types of chemicals, cooperating with experts and professors from various colleges and universities, Lanyao manufacturing-type enterprise was settled in yixing, jiangsu province.
Lanyao produces a wide range of chemicals used in water treatment processes, including coagulants, flocculants, PH adjusters such as polyaluminium chloride, poly ferric sulphate, sodium acetate and polyaluminium ferric chloride, etc. The company is now located in the Chemical Industry Zone in Jiangsu Province, with a factory area of 17,000 square meters and 108 employees.
We have a complete set of production management and quality control systems. We got the 1SO9001 quality system certification in 2012, the ISO14001 environmental system certification in 2014, and the occupational health and safety management system certification in 2016. The company has both advanced equipment and talents, domestic advanced testing equipment, and over 30 years of professional and technical personnel with intermediate and senior titles. In addition, the company has a professional transportation team, and owns 10 liquid PAC tankers and 5 vans, which can fully guarantee the timeliness of product supply.
FAQ
Contact Person: Madeline
Tel: +8618351519428
Fax: 86-510-8755-2528
