Corrosion Scale Inhibitors for Water Treatment in Boilers

Colorless To Amber Transparent Liquid Specifically For Corrosion And Scale Inhibitors In Boiler Water treatment

Product description

Physical data:

Applications:

• Boiler water

• Seawater desalination

• Distillation

• Corrosion and scale inhibition in water treatment systems such as car water tanks

Usage Method:

1. Add 200g of chemicals to each ton of water to supplement the boiler water. Pay attention to discharge the water during use, requiring it to be discharged once an hour for 5-10 seconds each time. If the boiler is running with scale, increase the amount of corrosion and scale inhibitors, and discharge the water frequently. After 10-20 days of operation, the boiler should be shut down, and the fallen scale should be manually cleaned to prevent it from blocking the pipeline, and then switch to normal operation;
2. If conditions permit, the concentration ratio of furnace water can be measured, controlled at around 10 times, and other parameters can be adjusted according to relevant regulations of the labor department (such as furnace water pH 10-12, etc.);
3. The dosing water tank should be made of plastic products, and the water tank made of cement material should be treated with anti-corrosion treatment, otherwise it is easy to be corroded by chemicals, resulting in an increase in the hardness of the water:
4. The total hardness of boiler make-up water should be controlled within 200mg/L. If the hardness is too high, lime method or other methods can be used to reduce the hardness, otherwise the scale inhibition effect of the boiler scale inhibitor will be affected.

Our main products include Polyaluminum Chloride ，Aluminum Chlorohydrate，Polyferric Sulfate，Biochemical Bacteria，Polyacrylamide PAM and Decoloring Agent.