Cationic Polymer Coagulant Minimal Wastewater Treatment

Product Description

CAS Number: 9003-05-8

Polyacrylamide is a general term for acrylamide homopolymers or polymers copolymerized with other monomers. PAM  polyacrylamide is one of the most widely used water-soluble polymers. Polyacrylamide is used for sedimentation, flotation and dewatering to improve efficiency in wastewater treatment. PAM Powder is widely used in petroleum extraction, papermaking, Water Treatment, textile, medicine, agriculture and other industries.

• Appearance: White granule
• Molecular weight: 5 - 22 million minimum
• Granule: 20 - 100 mesh
• Solid content: 88% minimum
• Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 50%
• Dissolving time: 1 hours maximum (10° C)
• Insoluble: 0.5% maximum
• Monomer free: 0.05% maximum

Application

• Municipal Waste Water Treatment
• Industrial, Oil&Gas, Petrochemical, Pulp&Paper, Textile, and Plating Waste Water Treatment
• Mines Process Water Recycling and Cost Reduction
• Decreasing Disposed Tailing Volume
• Recycling Minerals and Process Water in Mines
• Oil Recovery Enhancement
• Enhancing Drilling Fluid Performance: Well Collapse Prevention, Bit Lubrication and Cooling
• Friction Reduction in Oi Transportation
• Improving Uniformity and Softness of Paper
• Increasing Efficiency and Reducing Cost of Paper Production
• Soil Stabilization and Conditioner
• Increasing Water Infiltration Rate of Soil.
• 

Application Method:

1. Usually the product is prepared into solution of 0.1%-0.3% (W/W), with dosage range of 0.1-10 ppm (0.1-10mg/L)in target water according to type of effluent and application.

2. Targeted at different purposes, choose the best quantity of reagent via jar test to evaluate the functioning and approximate dosage.

Features

• Strong coagulant agent
• Environmental friendly
• Non-decoposable in nature(into toxic monomers)
• No poisoning and side effects
• Variety of characteristics and chemical and physical behavious