PAM for Industrial and Drinking Water Treatment

Usage of C ationic P olyacrylamide :

1).Through a small test to determine the best model, and the product’s optimal dosage.

2). The product is formulated as an aqueous solution with a concentration of 0.2% (referring to the solid content), preferably neutral water without salt.

3). Dissolved water, the product evenly sprinkled into the stirring water, appropriate heating (<60 °C) can be accelerated into a solution (stirring time is about 40 minutes).

4). Solid products should not be sprinkled on the floor to prevent the product from becoming slippery after absorbing moisture.

5). The preparation of Poly Acrylamide aqueous solution should be carried out in enamel, galvanized, aluminium or plastic barrels. It cannot be prepared and stored in iron containers.

6). When dissolving, care should be taken to add the product evenly and gradually to the dissolver with stirring and heating measures. The solidification should be avoided. The solution should be prepared at a suitable temperature, and mechanical shearing should be avoided. Mixer 60-200 rev / min, otherwise it will lead to polymer degradation, affecting the use of effects.

7). The Poly Acrylamide solution should be ready for use. When the solution is left for a long time, its performance will gradually decrease depending on the water quality.

8). After adding an aqueous flocculant solution to the suspension, if the stirring is vigorously performed for a long time, the formed flocks will be destroyed.

 

 

Package of C ationic P olyacrylamide :

Cationic Poly Acrylamide Packaging, Storage and Handling and Precautions:

Solid products are packed in paper bags, lined with plastic bags, 25kg per bag, and can also be packaged according to customer requirements.

This product has hygroscopicity, should be sealed and stored in a cool dry place, the temperature is lower than 35 °C, the effective storage period is 2 years.

Urban domestic wastewater,Brewery wastewater,Papermaking wastewater,Printing and dyeing wastewater,Tannery wastewater,Slaughterhouse,Oil field exploitation

1. Cationic Polyacrylamide can also be used as coagulant or flocculant to clarify wastewater.
2. The role of cationic polyacrylamide in oilfield development is to adjust the rheology of injected water, increase the viscosity of driving fluid,improve oil recovery.

1. The CPAM solid ispacked in polypropylene woven bags, lined with plastic bags, each bag is 25kg; The colloidal body shall be packed in plastic drums, lined with plastic bags, each of which is 50kg or 200kg.
2. This product is hygroscopic and should be stored in a cool and dry place with a temperature lower than 35 ° C.
3. The CPAM solidshall not be scattered on the ground to prevent the ground from becoming slippery after moisture absorption.
4. The storage period of our products is one year.